specification control drawing te connectivity 300 constitutional drive menlo park, ca 94025 usa raychem title: soldersleeve* device with pre-installed lead immersion resistant unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: so63-a-55-ga-cl tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 16-apr-11 doc issue: 8 drawn by: m. foronda cage code: 06090 replaces: d981087 dcr number: d981962 prod. rev.: see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. product revision product dimensions cable dimensio ns product name ident. code a ? 1.75 (a ? 0.07) ?b min ?c min h min ?e max ?f min ?g min ?d max j ? 0.5 (j ? 0.02) so63-1-55-ga-cl * so631r 16.5 (0.650) 1.90 (0.075) 2.65 (0.105) 8.25 (0.325) 2.65 (0.105) 0.90 (0.035) 0.50 (0.020) 1.90 (0.075) 7.5 (0.295) so63-2-55-ga-cl * so632r 16.5 (0.650) 2.65 (0.105) 3.68 (0.145) 8.25 (0.325) 3.68 (0.145) 1.40 (0.055) 0.75 (0.030) 2.65 (0.105) 7.5 (0.295) so63-3-55-ga-cl * so633r 16.5 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 5.08 (0.200) 2.15 (0.085) 1.25 (0.050) 4.30 (0.170) 7.5 (0.295) so63-4-55-ga-cl * so634r 19.1 (0.750) 5.95 (0.235) 6.45 (0.255) 8.25 (0.325) 6.45 (0.255) 3.30 (0.130) 1.80 (0.070) 5.95 (0.235) 7.5 (0.295) so63-5-55-ga-cl * so635r 19.1 (0.750) 7.00 (0.275) 7.6 (0.300) 8.25 (0.325) 7.6 (0.300) 4.30 (0.170) 2.50 (0.100) 7.00 (0.275) 7.5 (0.295) * consult raychem for individual product revision. contains more than 1 part name. materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux and thermal indicator: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: fusible ring, melt point: 22 1 ? c. 3. meltable ring: environment resistant thermoplast ic. color:blue. 4. ground lead: mil-w-22759/32-ga-cl. see part numb er guide for gauge and color information. application 1. these parts will provide a shield termination as sembly which will meet the requirements of mil-s-83 519/2 when installed in accordance with raychem rcps-100-70 on cables r ated for at least 125 ? c, meeting the dimensional criteria listed, having tin or silver plated shields. see m83519 or consult ra ychem for compatible insulation material. 2. temperature rating: -55 ? c to +150 ? c. for best results, prepare the cable as shown: part number guide: so63-a-55-ga-cl lead color designation per mil-std-6 81. standard color: -90 white with black stripe. for availability of other colors, co nsult raychem. lead awg 18, 20, 22, 24, 26. lead type: m22759/32 (raychem 55a0111) . parts shall be noted with identification code per t able. size 1 to 5. g is the minimum diameter on which the sleeve wil l seal. * a trademark of te connectivity.
|